This is the tool needed to get the job of setting lead machine screw anchors done fast.
The power setting tool by Elco attaches directly to the drill and acts to pull the insert into the lead shield.
Masonry surfaces are often unpredictable. Whether you are a homeowner looking to set all your anchors uniformly and correctly or a pro installer wanting to speed your install times. Set the anchor right the first time.
The fastest, easiest and most reliable way to install machine screw anchors (Calk-In™ Anchors)
No use of the clumsy hammer & setting tool or the expensive and slow expander setting tools
Power tool does all the work
Put RapidSet® Installation Tool into power tool, trigger tool to rapidly spin anchor onto tool, insert into hole and trigger tool. (Battery impact drivers work great)
Eliminates the need for anchor to be bottom bearing
Automatically sets anchor just below the surface – no guessing on depth
MAXX model (1/4-20 size only) allows for placing anchor at various depths (up to 2”) below the surface as in stucco over block applications
Mechanical action of tool’s threaded stud pulling up on internal anchor threads is much more efficient than pounding down the lead anchor sleeve.
Maximizes expansion of bottom portion of lead sleeve which results in consistently high pull-out values
MAXX version actually pulls down from the top in addition to pulling up from bottom for even higher pull-out values
We strive to sell only Hurricane Protection Hardware that is CODE APPROVED to provide the type of protection needed for homes and businesses in high-risk storm areas! Please check with the manufacturer and your local municipality to confirm proper application prior to any installation in the Windborne debris region.
![1/4 Elco Power Setting Tool [1 per PKG] use to install machine screw anchors - EZB810](/i/Tools/1-4Elco_Power_Setting_Tool.jpg)
