ELCO Nylon Push in Button Screws Fit all Female Anchors 100@Pack

knowing a company like this is essential as you need repair/replacement parts. This company is well run and responsive. We definitely keep them in our list of resources.

Prior to the last hurricane and as we began putting up yhe blinds we noticed our older plugs have basically dried out and crumbled. Looking for alternatives, I found these and they are sturdy excellent quality. Now the test of time

I feel bad providing one star because I really love the Windstorm products but this product is not good for this application. I tried to match what was installed previously when adding anchors for my front door. It was difficult to see the product on the website with the bag label in the way but I thought the flanges were bigger. What works best is a white nylon rivet with a 3/4” concave head. It completely covers the anchor and flushes out nicely. This product falls short of covering the anchor and hole. Sorry. WindStorm Products Responds: The ENY186 has been our second-best seller over the last 12 years and is manufactured by DeWALT Anchors to pair with the ELCO brand PanelMates they manufacture.

I ordered the screw in caps because we lost some of our originals. They work fine but would have liked to have ordered a quantity less than 100 as I only needed 4.

The head size and length of this product is too small for the anchors and hole size in my window frames. WindStorm Products responds: The head diameter of the nylon push in screw is ½”. All residential hurricane protection requires either a 7/16” or ½” diameter hole of which this will handily cover.

I bought these to replace the little crap ones that were put in when house was built. I have lost more than half of those because the wind just takes them out. These screw in which is a little more work, but my holes will not be filled with dirt and grime. And they sure aren't going to blow out. And they are all plastic which this pic does no reflect that in my opinion, they look metal but are not.