- Home
- Hurricane Hardware
- Track Hardware
- Storm Protection Kit
Storm Protection Kit
2-1/4" Tapcon Storm Guard Anchors in White Ultrashield Finish with 1-1/8" Threaded Stud
kit de protección para ventanas y puertas
Key Features & Benefits
- Just drill and drive; no countersinking needed
- Fastener length: 2-1/4" embedment - 3-7/16" overall length
- White Ultrashield® finish
- This is a true grab and go kit covering everything but the drill and storm panels
- 3/16" drill bit size for masonry is included
Once in place, anchors await quick and easy attachment of all types of storm panels including plywood with standard 1/4‑20 washered wingnuts.
Kit Includes
- 40 - 2-1/4" Tapcon sg anchors with 1-1/8" threaded stud
- 40 - 1/4-20 washered wingnuts for holding storm panels
- 40 - 1-1/8" white plastic caps for covering anchors when not in use
- 2 - 3/16" drill bits - both masonry and wood
- 1 - 3/16" sg driver (for use only with "White" Storm Guard Anchors)
Application:
Tapcon SG is a direct mount, permanent screw anchor for quick and easy installation of metal and plywood storm panels to wood, block and concrete
-
nice kit!
Posted by John Hillestad on 10 01 2020
Kit has everything you need to put up shutters or wood. out of my 4 kits about 3 anchors had bad threads and 1 kit was missing the drill bits so double check your kit when you get it. I also used the bigger drill bit because if the anchor is too tight going in the socket will strip it.
-
Nice complete kit
Posted by Unknown on 05 12 2020
I had been looking for a kit like this as opposed to having to but all of the pieces separately. This was just what I was hoping to find and it worked well.
-
Great product
Posted by Lawrence R Genetti on 08 03 2019
Easy to use great directions